|    __/__|  \__    \   \\    \    __/___.     Living on the EDGE

RELEASE NAME ..... busTRACE v6.0
SUPPLIER ......... Team EDGE
CRACKER .......... Team EDGE
PROTECTION ....... Custom Dongle
RELEASE DATE ..... 15/10/2007
SIZE ............. 5 x 5MB
URL .............. http://www.bustrace.com/

PRODUCT DESCRIPTION

busTRACE v6.0

Hey hey hey kids, Team EDGE is back once again!

We simply love this program enough that we coded both a dongle
creator program for guys who have a SanDisk Micro Cruzer USB Flash
stick ($5 online) and we did a nice little dongle emulator driver
for those of you who prefer this method.

So people enjoy this awesome program, we sure do.

busTRACE 6.0 is a comprehensive bus and device analysis tool in use
by leading system OEMs, peripheral OEMs, software developers, USB
developers, and storage developers all over the world.

busTRACE 6.0 provides a suite of applications designed to help you
perform advanced bus and device analysis.

Capture I/O activity on your computer or any computer, busTRACE 6.0
includes the ability to capture and analyze storage class I/O
activity within your Windows PC.

Under Windows 2000 (and above), busTRACE also allows you to capture
and analyze all low-level USB bus activity.

Bus Architectures Supported:

busTRACE 6.0 can capture and analyze storage device I/O activity
(e.g. hard drives, tape drives, CD/DVD/HD/BD drives, jukeboxes,
etc.) on a variety of bus architectures including:

- IDE/ATA/ATAPI   - Serial ATA           - Serial ATAPI
- SCSI            - iSCSI                - Serial Attached SCSI
- Fibre Channel   - RAID                 - USB 1.0 or 2.0
- 1394 / Firewire - Multipath I/O (MPIO) - and more!

INSTALLATION INSTRUCTIONS

1. Unzip and Unrar.

2a. If you have a SanDisk Cruzer Micro 128MB to 2GB USB Flash Stick
we have included a tool that you can make your own dongle with!

Plug in your Flash Stick and run: \EDGE\create\create.exe
to make your very own dongle.

If you did this step then you dont need the ones listed below
since you are the lucky owner of a fully feature dongle now.

2b. If you dont have a SanDisk Cruzer Micro stick we supply a nice
dongle emulator, here is how to install it:

Start the Control Panel and select Add Hardware and follow
the wizard. Below are the steps under XP:

* Have you already connected the hardware to your computer?
[Yes]

* From the list below, select an installed hardware device...
[scroll down and select "Add a new hardware device"]

* What do you want the wizard to do?
[Install the hardware that I manually select from a list]

* If you do not see the hardware category you want, click
Show All Devices.
[Show All Devices]

* Select the manufacturer and model...
[Press the "Have Disk" button]

* Copy manufacturer's files from:
[Navigate to the EDGE\Emu directory]

Windows 2000 only: if you are prompted to assign resources,
select cancel and installation will complete.

3. Run BusTrace_Setup6_0_025.exe and complete the installer,
dont run the program yet.

4. Run BusTrace_6_0_035_up(DataCode-20070306).exe to upgrade
to v6.0.035, dont run the program yet.

5. Copy inject.exe from the EDGE dir to where you installed into
e.g.: c:\Program Files\busTRACE 6.0\

And run this program, thats all, emulator should be installed
and injected. You can now enjoy this awesome software.

6. Enjoy!

PS. Do NOT upgrade/check for updates thought the internet.

WE ARE DEDICATED TO QUALITY, NOT QUANTITY, AND WE ARE DOING IT FOR THE LULZ!