Unfortunately, this site has restricted functionality as this browser does not support the HTML button formaction attribute.

Unfortunately, this site has restricted functionality as this browser has HTML web storage turned off.

1 of 3 files phobia

    Download rev-03.zip

    Size 1.6 MB

  • This download is an executable MS-DOS program that will not run on a modern computer. It needs a DOS emulator such as DOSBox-X, Staging; or a virtualized MS-DOS or FreeDOS system.
    Browsers may flag this download as unwanted or malicious. If unsure, scan it with VirusTotal.
  • Last modified
     MD5 checksum 91d2b7d5f9a83c1da967aa3b7fae1e73
        Mime type Zip archive data

1997 May 24

Bye Bye TKLP.

Emulating REV/ISSUE_3/REV97-03.EXE in DOSee.

Use these tabs to make adjustments to the emulation

If the emulation is taking too long to load, you can turn it off.

Reload DOSee to launch the DOS prompt

Applying changes will reload the page and reboot the emulator

Changes are not applied until the browser tab is reloaded

DOS programs need a keyboard for user input
Some common keys used in DOS programs

ENTER ↵ to select or continue
ESC to navigate back or exit
←→ ↑↓ are often used to navigate menus

Emulation too slow?
Set the emulator to use maximum CPU speed

Emulation too fast?
Set the emulator to use the 386 CPU configuration

Experiencing graphic or animation glitches?
Set the emulator to use VGA only graphics configuration

Need to turn off the audio?
Disable sound card support

Have no audio?
  1. Try Gravis Ultrasound hardware
  2. The song or audio file maybe missing from the program

DOSee pronounced dos/see, is our emulator used to run MS-DOS based software in your web browser.

MS-DOS (Microsoft DOS) was the primary operating system used by PCs during the 1980s to the early 1990s and is the precursor to Microsoft Windows.

DOSee is a slimmed down, modified port of The Emularity.

The Emularity is a multi-platform JavaScript emulator that supports the running of software for legacy computer platforms in a web browser. It is the same platform that's running emulation on the Internet Archive.

EM-DOSBox is a discontinued, high-performance JavaScript port of DOSBox that is applied by The Emularity for its emulation of the MS-DOS platform.

DOSee uses BrowserFS ZipFS and ZipFS Extras to simulate zip file archives as hard disks within EM-DOSBox.

DOSBox is the most popular MS-DOS emulator in use today and is frequently used by commercial game publishers to run games from their back-catalogues on modern computers.

DOSee, built on The Emularity, EM-DOSBox and DOSBox. Capture screenshot and save function built on canvas-toBlob.js.

9 items in the archive
  • REV/ISSUE_3/REV97-03.NFO
  • REV/ISSUE_3/REV97-03.EXE
  • REV/ISSUE_3/REV97-03.DIZ
[+] Configuration Copy text
August 15, 1993 RELEASE NOTES FOR VESA SUPER VGA BIOS EXTENSION VVESA.COM (VER 2.21) READ THIS FILE COMPLETELY BEFORE ATTEMPTING TO USE THIS PRODUCT Contents 1.0 Introduction 2.0 Command Line Keywords 3.0 VESA Modes Supported 4.0 Vesatest Utility 5.0 Windows and VVESA.COM 6.0 VESA Standards 1.0 Introduction VVESA.COM is a Terminate and Stay Resident (TSR) program. It is the implementation of the VESA Super VGA BIOS Extension Standard #VS911022. VVESA is not a driver. It is a program which enables your video board to be used with VESA compatible software. Consult your software manual or your software manufacturer's Technical Support to see if a VESA driver is available for your software. Install your software for VESA Super VGA. Then run VVESA before running your VESA compatible software. If you prefer, a batch file can be written to invoke VVESA and then your software. The resident portion of VVESA only consumes a small amount of memory. To run MS Windows 3.1 with VESA 800x600 16-color driver in the 7-bit video mode 6A, VVESA is not required. To remove VVESA from memory, type: VVESA OFF. 2.0 Command Line Keywords Here is a list of VVESA advanced command line keywords: OFF Remove the driver from the system memory. PAN Enable Linear Address It allows user to pan or scroll within the entire display memory. Standard VGA will wrap around at the end of 64K in planar mode. Linear address is disabled at default. 55rw Force single page read & write mode The Write Page number is set to Read Page number when a display mode is initialized. (Note that only display controller 28800-5 or higher is default to dual page mode, i.e. the writeable and readable windows can be programmed independently) DUALPAGE Turns on individual read and write windows which can be programmed independently for all supported 8, 15 and 24 bit modes including: 100h, 101h, 103h, 105h, 110h, 112h and 113h. FOR MACH32 CARD USERS ONLY: DUALPAGE Does not enable separate read and write windows for the following 15 and 16 bit modes: 110h, 111h, 113h, 114h, 115h, 116h and 117h. NOHICOLOR Disables support for 32,768, 65,536 and 16.7M colour modes on mach32 products. It also disables support for mode 107h (1280 x 1024 256 colours). It will save above 4K of system memory if your application does not support these high color modes. ******** WARNING: ******** If you change the VGA Memory Size setting in the Install program, you must UNLOAD and then RELOAD the VESA driver. Failure to do so can cause unpredictable results as the driver may try and set modes that are no longer supported by the new setting, or fail to support modes that are now possible. To unload the driver use the command "vvesa off", to reload it simply use the command "vvesa." For example, to enable driver to view display memory at upper 512KB, type: VVESA PAN <enter> Then run your VVESA application. 3.0 VESA Modes Supported The following VESA modes are supported: MODE RESOLUTION MEMORY MEMORY PRODUCT NUMBER /COLORS REQUIRED MODEL REQUIRED 100h 640x400 /256 512KB packed pixel 101h 640x480 /256 512KB packed pixel 102h 800x600 /16 256KB 4-plane planar 103h 800x600 /256 512KB packed pixel 104h 1024X768 /16 512KB 4-plane planar all except V3 105h 1024X768 /256 1MB packed pixel 107h 1280X1024 /256 1MB packed pixel mach32 108h 80x60/16 256KB Text mode 109h 132x25/16 256KB Text mode 10Ah 132x43/16 256KB Text mode 110h 640x480/32768 1MB packed pixel XL, XL24 mach32 111h 640x480/65536 1MB packed pixel mach32 112h 640x480/16.7 M 1MB packed pixel XL24, mach32 113h 800x600/32768 1MB packed pixel XL24, mach32 114h 800x600/65536 1MB packed pixel mach32 115h 800x600/16.7 M 2MB packed pixel mach32 116h 1024x768/32768 2MB packed pixel mach32 117h 1024x768/65536 2MB packed pixel mach32 Note that some display adapters may not be capable of displaying all the modes listed above depending on the model, amount of video memory and how the display adapter is configured. Check the user's manual of your display adapter for information on how to configure display adapter and the available modes. Note that when using modes 107h, 110h, 111h, 112h, 113h, 114h, 115h, 116h, or 117h on the mach32 some applications may appear with dim or incorrect colors. This happens because these modes require the colour registers (i.e. DAC registers) to be set through video BIOS calls only. Some applications set these registers directly, which results in incorrect colour settings in these modes. If you encounter this problem, contact the application publisher. 4.0 Vesatest Utility VESATEST.EXE is a utility program to check which modes are supported on your display adapter, run VESATEST after loading VVESA. This utility will provide a listing of all VESA modes available on your card. 5.0 MicroSoft Windows and VVESA.COM Running VVESA.COM under Microsoft Windows is not recommended and can corrupt the display. 6.0 VESA Standards Programmers requiring more information about VESA standards may obtain copies of the specifications by writing or calling: VESA 1330 South Bascom Ave., Suite D San Jose, CA 95128 (408) 971-7525
REV/ISSUE_3/REV97-03.NFO 80x162 Font